Magellan Paradox Instrukcja Instalacji Pobierz pdf (Strona 7)

Paradox Magellan Systems 7

For more in-depth programming of the console’s zones,

see Zone Programming on page 15 and Wireless

Programming on page 19.

Testing the Magellan System

1. From the “System Test” menu,

press [OK].

2. Select which test you wish to

perform by pressing [

NEXT] and

press [OK] when the desired test

appears. The following tests can

be performed:

- Zone tests

- Remote control tests

- Reporting tests

- Hardware tests

After pressing [

OK], Magellan will begin performing the test or will

instruct you on what to do via the LCD screen.

WARNING! When testing the hardware, the speaker and

sirens will also be tested. Do not be in close proximity to

the Magellan console when performing the hardware test to

avoid any damage to your hearing.

When you are done the next menu option will appear. Press

[NEXT] until you see the “Passwords” menu or press the [8] key to

immediately access the “Passwords” menu.

Passwords

1. From the “Passwords” menu,

press [

OK].

2. Select which password(s) or

code(s) you wish to program by

pressing [

NEXT] and press [OK]

when the desired password

appears. The following

passwords can be programmed:

- Installer code

- Maintenance code

- Panel ID

- PC Password

When you are done the next menu option will appear. Press

[

NEXT] until you see the “User Profile” menu or press the [2] key

to immediately access the “User Profile” menu.

For more in-depth programming of the console’s

passwords, see User Codes on page 14 and WinLoad

Software Settings on page 35.

Assigning Remote Controls

1. From the “User Profile” menu,

press [OK].

2. Press [

NEXT] until you reach the

desired user and then press [

OK].

Follow the on-screen instructions

to program the user access code

and label.

3. Press [

YES] and then follow the

on-screen instructions to assign a

remote control to the user.

4. After assigning the remote

control, press [

YES] to assign

another remote control to another

and then follow steps 2 to 4.

Press [

NO] to exit.

Time and Date

1. Press the [MENU] key.

2. Press [

NEXT] until you reach the

“Time and Date” menu and press

[

OK] or press the [3] key to access

the “Time and Date” menu.

3. Select the time format (12Hr-

clock or 24Hr-clock) and then

program the time. Press [

OK]

when done to then program the

date.

4. Program the date by entering the

4-digit year first, followed by the

2-digit month and then the 2-digit

day. Press [

OK] when done.

1 2 3 4 5 6 7 8 9 10 11 12 ... 44 45

Komentarze do niniejszej Instrukcji

Brak uwag

Magellan Paradox Instrukcja Instalacji Strona 7

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Magellan Paradox