Magellan Paradox Instrukcja Instalacji Pobierz pdf (Strona 6)

6 Reference & Installation Manual

Quick Setup

Getting Started

1. After powering up for the first

time, press [START] to access the

Installer Menu.

2. The first menu option will appear.

Press [

NEXT] to go to the “User

Profile” menu.

User Programming

1. From the “User Profile” menu,

press [

OK].

2. Select which user you wish to add

by pressing [

NEXT]. When the

desired user appears, press [OK]

and follow the menus to set:

- Access Code

- User Label

- Remote Control

When you are done the next

menu option will appear (see

Central Station Reporting below).

For more in-depth programming of the console’s remote

controls, see Wireless Programming on page 19.

Central Station Reporting

1. From the “Communicator” menu,

press [

OK].

2. Press [

OK] and follow the menus

to set:

- Telephone numbers

- Account Number

- Report Format

3. When you are done the next

menu option will appear. Press

[

NEXT] until you see the “Zone

Profile” menu.

For more in-depth programming of the console’s

communication features, see Reporting and Dialer

Settings on page 26.

Adding and Programming Zones

1. From the “Zone Profile” menu,

press [OK].

2. Select which zone you wish to

add by pressing [

NEXT] and press

[OK] when the desired zone

number appears.

3. Press tamper switch on

transmitter you wish to assign to

the selected zone. Follow the

menus to set:

- Zone Label

- Zone Type

- Other Zones

When you are done the next menu option will appear. Press

[

NEXT] until you see the “System Test” menu or press the [5] key

to immediately access the “System Test” menu.

For more in-depth programming of the console’s zones,

see Zone Programming on page 15 and Wireless

Programming on page 19.

Deleting Zones

1. From the “Zone Profile” menu,

press [OK].

2. Select which zone you wish to

delete by pressing [

NEXT] and

press [OK] when the desired zone

number appears.

3. Press [

YES].

4. Press [

YES]. To delete another

zone, press [

YES] and then repeat

steps 2 to 4.

When you are done the next menu option will appear. Press

[

NEXT] until you see the “System Test” menu or press the [5] key

to immediately access the “System Test” menu.

1 2 3 4 5 6 7 8 9 10 11 ... 44 45

Komentarze do niniejszej Instrukcji

Brak uwag

Magellan Paradox Instrukcja Instalacji Strona 6

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Magellan Paradox