Magellan Paradox Instrukcja Instalacji Pobierz pdf (Strona 12)

12 Reference & Installation Manual

viewing while the rubber stops prevent the console from

sliding when Magellan is being used. Attach the plastic feet

and rubber stops as shown in Figure 12 on page 12. To

mount the wall plate onto the console:

1. Place the console back plate flush against the mounted

wall plate.

2. Slide the Magellan’s open slots labeled D (see Figure 11

on page 11) onto the wall plate’s tabs labeled B (see

Figure 10 on page 11).

3. Gently apply downward pressure to insert the wall

plate’s tabs into Magellan’s open slots.

4. Insert two screws through the wall plate’s screw holes

labeled C and into holes labeled E (see Figure 11 on

page 11) in the Magellan back plate.

Figure 12: Mounting Magellan on a Tabletop

Tabletop mounting may not be an approved installation

method by local regulations. It is recommended that the

local regulations be verified prior to installing the Magellan

console using this method.

Connecting the Radio Antenna

If the radio’s reception is not very good, connect the supplied

radio antenna to the ANT terminal on the back of the Magellan

console as shown in Figure 13 on page 12. Move the antenna

around until the spot with the best reception is found.

Figure 13: Connecting the Radio Antenna

Tabletop

Plastic feet

(x2)

Rubber stops

(x2)

Wall

plate

Radio

Antenna

Back view of the Magellan console.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 44 45

Brak uwag

Magellan Paradox Instrukcja Instalacji Strona 12